"Device Testing"

#5907134

5 August 2020

Covid-19 sample for testing is recorder by a mobile device. Greece is checking arriving tourists at the Greek-Bulgarian borders on July 31, 2020 for Covid-19. Travelers in cars and buses from all over Europe but mostly from Bulgaria, Romania, Czech Republic and Poland arrive at the Greek Bulgarian borders of Promahonas - Kulata, entering point in Greece for holidays and they are checked for Coronavirus. Greece lifted the travel ban since July 1 and relaunched the tourism season. Arriving tourists should carry the special Passenger Locator Form for each individual, a new required document to enter Greece for all the arriving people and the increased Covid-19 Coronavirus tests that are applied to most of the arriving cars, based on a special algorithm. Greece increased the testing capacity with the health crew of the National Public Health Organization EODY at the land borders. Greece will allow the entrance only to passengers with up to 72 hours prior to the arrival Covid-19 test with negative results in English from a certified laboratory. In August 2020 Greece is starting implementing new protective measures against the spread of the pandemic outbreak, as people relax and avoid the guidlines.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5907098

5 August 2020

A healthcare worker entering data to the mobile device that is scanning the covid samples. Greece is checking arriving tourists at the Greek-Bulgarian borders on July 31, 2020 for Covid-19. Travelers in cars and buses from all over Europe but mostly from Bulgaria, Romania, Czech Republic and Poland arrive at the Greek Bulgarian borders of Promahonas - Kulata, entering point in Greece for holidays and they are checked for Coronavirus. Greece lifted the travel ban since July 1 and relaunched the tourism season. Arriving tourists should carry the special Passenger Locator Form for each individual, a new required document to enter Greece for all the arriving people and the increased Covid-19 Coronavirus tests that are applied to most of the arriving cars, based on a special algorithm. Greece increased the testing capacity with the health crew of the National Public Health Organization EODY at the land borders. Greece will allow the entrance only to passengers with up to 72 hours prior to the arrival Covid-19 test with negative results in English from a certified laboratory. In August 2020 Greece is starting implementing new protective measures against the spread of the pandemic outbreak, as people relax and avoid the guidlines.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5771234

9 June 2020

A police officer seen during a speed check on the national road 94, near the village of Bialy Kosciol. Krakow's Police Road Traffic Department has introduced a new initiative called 'From Katowice to Krakow, is the speed correct'. From June 8th, road patrols of the Lesser Poland and Silesian regions will be focused on improving the safety of road users and eliminating behaviors that have a negative impacts on road safety. On June 8, 2020, in Bialy Kosciol, Krakow County, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5771238

9 June 2020

A police officer seen during a speed check on the national road 94, near the village of Bialy Kosciol. Krakow's Police Road Traffic Department has introduced a new initiative called 'From Katowice to Krakow, is the speed correct'. From June 8th, road patrols of the Lesser Poland and Silesian regions will be focused on improving the safety of road users and eliminating behaviors that have a negative impacts on road safety. On June 8, 2020, in Bialy Kosciol, Krakow County, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5771240

9 June 2020

Two police officers seen during a speed check on the national road 94, near the village of Bialy Kosciol. Krakow's Police Road Traffic Department has introduced a new initiative called 'From Katowice to Krakow, is the speed correct'. From June 8th, road patrols of the Lesser Poland and Silesian regions will be focused on improving the safety of road users and eliminating behaviors that have a negative impacts on road safety. On June 8, 2020, in Bialy Kosciol, Krakow County, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5771242

9 June 2020

A police oficer carries a compact breathalyzer for a test, during a speed check on the national road 94, near the village of Bialy Kosciol. Krakow's Police Road Traffic Department has introduced a new initiative called 'From Katowice to Krakow, is the speed correct'. From June 8th, road patrols of the Lesser Poland and Silesian regions will be focused on improving the safety of road users and eliminating behaviors that have a negative impacts on road safety. On June 8, 2020, in Bialy Kosciol, Krakow County, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5637064

21 April 2020

A 3D printer makes partes of the VentilAid Prototype III respirator, a device that can be manufactured cheaply and with widely available parts using a 3D printer. The project was created by Urbicum, a Krakow based company specializing in 3D printing. The first two versions were developed and made available for free on the Internet. VentilAid Prototype III is a device for non-invasive ventilation, operating in CEPAP and BiPAP mode with an oxygen supply and meets the requirements of modern medical standards. It allows to keep patients in a stable condition and/or improve the condition of a conscious patient who is not eligible to be put on a hospital respirator. On April 17, 2020, in Krakow, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5637094

21 April 2020

A 3D printer makes partes of the VentilAid Prototype III respirator, a device that can be manufactured cheaply and with widely available parts using a 3D printer. The project was created by Urbicum, a Krakow based company specializing in 3D printing. The first two versions were developed and made available for free on the Internet. VentilAid Prototype III is a device for non-invasive ventilation, operating in CEPAP and BiPAP mode with an oxygen supply and meets the requirements of modern medical standards. It allows to keep patients in a stable condition and/or improve the condition of a conscious patient who is not eligible to be put on a hospital respirator. On April 17, 2020, in Krakow, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5637058

21 April 2020

Szymon Chrupczalski, the VentilAid project coordinator, explains the utilisation of diving masks adapted to fit the VentilAid Prototype III respirator, a device that can be manufactured cheaply and with widely available parts using a 3D printer. The project was created by Urbicum, a Krakow based company specializing in 3D printing. The first two versions were developed and made available for free on the Internet. VentilAid Prototype III is a device for non-invasive ventilation, operating in CEPAP and BiPAP mode with an oxygen supply and meets the requirements of modern medical standards. It allows to keep patients in a stable condition and/or improve the condition of a conscious patient who is not eligible to be put on a hospital respirator. On April 17, 2020, in Krakow, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5637062

21 April 2020

Szymon Chrupczalski, the VentilAid project coordinator explains the different components used to build the VentilAid Prototype III respirator, a device that can be manufactured cheaply and with widely available parts using a 3D printer. The project was created by Urbicum, a Krakow based company specializing in 3D printing. The first two versions were developed and made available for free on the Internet. VentilAid Prototype III is a device for non-invasive ventilation, operating in CEPAP and BiPAP mode with an oxygen supply and meets the requirements of modern medical standards. It allows to keep patients in a stable condition and/or improve the condition of a conscious patient who is not eligible to be put on a hospital respirator. On April 17, 2020, in Krakow, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5637066

21 April 2020

Szymon Chrupczalski, the VentilAid project coordinator explains how a 3D printer makes the VentilAid Prototype III respirator, a device that can be manufactured cheaply and with widely available parts using a 3D printer. The project was created by Urbicum, a Krakow based company specializing in 3D printing. The first two versions were developed and made available for free on the Internet. VentilAid Prototype III is a device for non-invasive ventilation, operating in CEPAP and BiPAP mode with an oxygen supply and meets the requirements of modern medical standards. It allows to keep patients in a stable condition and/or improve the condition of a conscious patient who is not eligible to be put on a hospital respirator. On April 17, 2020, in Krakow, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5637068

21 April 2020

Jan Pawlik works on the oxygen concentrator that can be used with the VentilAid Prototype III respirator, a device that can be manufactured cheaply and with widely available parts using a 3D printer. The project was created by Urbicum, a Krakow based company specializing in 3D printing. The first two versions were developed and made available for free on the Internet. VentilAid Prototype III is a device for non-invasive ventilation, operating in CEPAP and BiPAP mode with an oxygen supply and meets the requirements of modern medical standards. It allows to keep patients in a stable condition and/or improve the condition of a conscious patient who is not eligible to be put on a hospital respirator. On April 17, 2020, in Krakow, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5637070

21 April 2020

Szymon Chrupczalski, the VentilAid project coordinator, explains the functioning of the VentilAid Prototype III respirator, a device that can be manufactured cheaply and with widely available parts using a 3D printer. The project was created by Urbicum, a Krakow based company specializing in 3D printing. The first two versions were developed and made available for free on the Internet. VentilAid Prototype III is a device for non-invasive ventilation, operating in CEPAP and BiPAP mode with an oxygen supply and meets the requirements of modern medical standards. It allows to keep patients in a stable condition and/or improve the condition of a conscious patient who is not eligible to be put on a hospital respirator. On April 17, 2020, in Krakow, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5637072

21 April 2020

Szymon Chrupczalski, the VentilAid project coordinator, explains the functioning of the VentilAid Prototype III respirator, a device that can be manufactured cheaply and with widely available parts using a 3D printer. The project was created by Urbicum, a Krakow based company specializing in 3D printing. The first two versions were developed and made available for free on the Internet. VentilAid Prototype III is a device for non-invasive ventilation, operating in CEPAP and BiPAP mode with an oxygen supply and meets the requirements of modern medical standards. It allows to keep patients in a stable condition and/or improve the condition of a conscious patient who is not eligible to be put on a hospital respirator. On April 17, 2020, in Krakow, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5637074

21 April 2020

Szymon Chrupczalski, the VentilAid project coordinator, explains how human lungs can function with the help of the VentilAid Prototype III respirator, a device that can be manufactured cheaply and with widely available parts using a 3D printer. The project was created by Urbicum, a Krakow based company specializing in 3D printing. The first two versions were developed and made available for free on the Internet. VentilAid Prototype III is a device for non-invasive ventilation, operating in CEPAP and BiPAP mode with an oxygen supply and meets the requirements of modern medical standards. It allows to keep patients in a stable condition and/or improve the condition of a conscious patient who is not eligible to be put on a hospital respirator. On April 17, 2020, in Krakow, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.

#5637078

21 April 2020

Szymon Chrupczalski, the VentilAid project coordinator, explains how human lungs can function with the help of the VentilAid Prototype III respirator, a device that can be manufactured cheaply and with widely available parts using a 3D printer. The project was created by Urbicum, a Krakow based company specializing in 3D printing. The first two versions were developed and made available for free on the Internet. VentilAid Prototype III is a device for non-invasive ventilation, operating in CEPAP and BiPAP mode with an oxygen supply and meets the requirements of modern medical standards. It allows to keep patients in a stable condition and/or improve the condition of a conscious patient who is not eligible to be put on a hospital respirator. On April 17, 2020, in Krakow, Poland.

Restricted to Editorial Use Only.
Commercial use is not permitted without prior authorization.
Please contact us for more information.